Hazard Statements

Precautionary Statements

General Handling: Avoid breathing vapor or mist. Avoid contact with eyes, skin and clothing. When handling, use appropriate personal protective equipment (see Section 8). Wash thoroughly after handling. Releases to the environment should be avoided. Review and implement appropriate technical and procedural waste water and waste disposal measures to prevent occupational exposure or environmental releases. Potential points of process emissions of this material to the atmosphere should be controlled with dust collectors, HEPA filtration systems or other equivalent controls. Storage Conditions: Store as directed by product packaging.

Engineering Controls: Engineering controls should be used as the primary means to control exposures. General room ventilation is adequate unless the process generates dust, mist or fumes. Keep airborne contamination levels below the exposure limits listed above in this section. Environmental Exposure Controls: Refer to specific Member State legislation for requirements under Community environmental legislation. Personal Protective Equipment: Refer to applicable national standards and regulations in the selection and use of personal protective equipment (PPE). Hands: Impervious gloves are recommended if skin contact with drug product is possible and for bulk processing operations. Eyes: Wear safety glasses or goggles if eye contact is possible. Skin: Impervious protective clothing is recommended if skin contact with drug product is possible and for bulk processing operations. Respiratory protection: If the applicable Occupational Exposure Limit (OEL) is exceeded, wear an appropriate respirator with a protection factor sufficient to control exposures to below the OEL.