Hazard Statements

Precautionary Statements

Handling: Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Readil y absorbs moisture from air. Storage: Keep container tightly closed in a cool, well-ventilated place. Material is hygroscopic (absorbs moisture) and deliquescent (absorbs moisture to become soution).

Control Parameters Engineering Measures: No exposure limits exist for the constituents of this product. Use local exhaust ventilation or other engineering controls to minimize exposures and maintain operator comfort. Personal Protective Equipment (PPE): Lab coat, apron, eye wash, safety shower. Respiratory Protection: No respiratory protection required under normal conditions of use. Provide general room exhaust ventilation if symptoms of overexposure occur as explained Section 11. A respirator is not normally required. Respirator Type(s): None required where adequate ventilation is provided. If airborne concentrations are above the applicable exposure limits, use NIOSH/MSHA approved respiratory protection. Eye Protection: Wear chemical splash goggles when handling this product. Have an eye wash station available. Skin Protection: Avoid skin contact by wearing chemically resistant gloves, an apron and other protective equipment depending upon conditions of use. Inspect gloves for chemical break-through and replace at regular intervals. Clean protective equipment regularly. Wash hands and other exposed areas with mild soap and water before eating, drinking, and when leaving work. Gloves: Butyl rubber, Neoprene, Nitrile